Protect the main Fuse
How do I prevent my main fuse from tripping?
By balancing the load across the electrical system’s three phases, you can protect your main fuses and access more power without having to upgrade your fuse rating and increase your costs.

Why does the main fuse trip?
The main fuse in many European countries consists of three individual fuses, one for each of the electrical system’s three phases. If the current flowing through one of the phases exceeds what the main fuse can handle, the fuse trips and the power is cut off.
This can happen when several appliances connected to the same phase are operating at the same time. The most heavily loaded phase can therefore cause the main fuse to trip, even if there is spare capacity on the other phases of the system.
EV charging normally uses all three phases, reducing the available capacity across the property’s entire electrical system.
How can I protect my main fuse?
Protect the main fuse
01
Upgrade the fuse
One option is simply to upgrade your connection and install a higher-rated main fuse. In addition to the cost of the work itself, this usually also means a higher annual electricity grid charge.
Protect the main fuse
02
Load management
If EV charging is causing the problem, a load management device can be used to reduce the charging rate when a certain load level is reached. However, during periods of high demand, this may mean that charging cannot start or takes a very long time.
Protect the main fuse
03
Battery
With a battery in the system, additional power can be supplied when the main fuse is at risk of tripping. However, a battery can also perform many other functions, so it is worth considering whether this is the most cost-effective solution.
Protect the main fuse
04
Phase balancing
Phase balancing means evening out the load on the most heavily loaded phase by using available capacity on the other phases.
Some providers use the term phase balancing when energy is supplied from another source, such as solar panels or a battery, or when a single-phase load (such as EV charging) is connected to the least heavily loaded phase.
True phase balancing means making more efficient use of the electricity grid’s own capacity by distributing all loads across the phases.
This makes it possible to minimise the size of the main fuse, since it no longer needs to be sized according to the most heavily loaded phase.
How Ferroamp protects your main fuse
Ferroamp protects your main fuses through dynamic phase balancing.
Dynamic phase balancing is a built-in feature of all EnergyHub units. It distributes energy across the property’s three phases, making it possible, for example, to charge electric vehicles while other household appliances are in use – without tripping the main fuse.

Simple
All you need is an EnergyHub. No battery or other equipment is required.
Reliable
It does not depend on the battery being charged and works continuously.
Flexible
You do not need to reserve part of the battery’s capacity for phase balancing. If you have a battery, you can use its full capacity to reduce your electricity costs.
The system that protects your main fuse
Â
Only an EnergyHub is required for phase balancing with the Ferroamp system.

