Cheaper EV charging
How can I charge my EV cheaply without interruptions?
Your electric vehicle should be charged and ready whenever you need it, and it should be charged at the lowest possible cost. Charging should therefore take place without unnecessary interruptions when electricity prices are at their lowest. The cheapest way to charge is with electricity generated by your own solar panels. The challenge is to combine these needs in a simple way.
Common problems with EV charging

Main fuse trips
Even if EV charging itself does not exceed the main fuse rating, one phase can become overloaded and trip the fuse if, for example, the oven is switched on while the car is charging.
Expensive peak power demand
If you pay a power demand charge, charging can become expensive when the car is charging at full power while other household appliances are running.
Charging is interrupted
A charger with load monitoring will stop charging if the main fuse is at risk of tripping or if it is configured to limit peak power demand. If, for example, you have a heat pump, charging often fails to start or is interrupted every time the heat pump switches on.
Charge cheaply and conveniently with Ferroamp
The Ferroamp system optimises your EV charging so that you can charge at the lowest possible cost while ensuring that your car is ready whenever you need it.
Phase balancing
Ferroamp’s dynamic phase balancing protects the main fuse by distributing the load from the home’s other electrical appliances evenly across all three phases. This frees up capacity so that charging can continue without being stopped or slowed down.
Load balancing
To prevent charging from creating expensive peak power demand, dynamic load balancing reduces the charging speed so that total power consumption stays below the desired power limit.
Charge with solar power
For the lowest possible charging cost, the system can be configured to charge your EV only when surplus solar electricity is available.
Integrated EV charging
Ferroamp’s phase balancing improves charging regardless of which charger you use. To use dynamic load balancing and the option to charge with solar electricity, the EV charger must be integrated with the system. Ferroamp can control several popular EV chargers, and can even control multiple chargers from different brands simultaneously.

The system for convenient and cheap EV charging
Optimised EV charging is just one of the many features of the Ferroamp system. The EnergyHub inverter is the only unit you need for phase balancing and smart charger control.

